Home / USG 6p-72

USG 6p-72


USG 6P-72 Series

Polycrystalline panels are made up from the silicon offcuts, moulded to form blocks and create a cell made up of several bits of pure crystal. Because the individual crystals are not necessarily all perfectly aligned together and there are losses at the joints between them, they are not quite as efficient. However, this mis-alignment can help in some circumstances, because the cells work better from light at all angles, in low light, etc.

The appearance is also different – you can see the random crystal arrangement and the panels look a little bluer as they reflect some of the light.

Since they are cut into rectangular blocks, there is very little wasted space on the panel and you do not see the little diamonds that are typical of mono or hybrid panels. Some people prefer this more uniform appearance, others like the diamonds. The choice is yours because the overall size and cost is very similar to monocrystalline.

High light transmission giving more electricity
Excellent mechanical loading performance (5400Pascal)
SPF-UL certified

High light transmission assuring better power performance
High GEL and peeling strength guaranting strong encapsulation
Good ultraviolet aging resistance
TUV/UL certified

TEDLAR based encapsulation and protection
Good aging resistance guaranting strong durability performance
Excellent adhesion and ultraviolet stability
TUV certified

Anodized/Electrophoretic aluminum means durable protection from environment
Unique designed profile ensuring strong mechanical loading performance
Silver/Black color available

Excellent efficiency and long term reliability
Good performance under high temperature and low irradiance conditions
100% In-Line Electroluminescence(EL) tested
Power tolerance for each panel TUV/UL

Reliable by-pass diodes assuring good product protection
Locking connector working compatible worldwide
Excellent heat emission performance
Improved gel-potted design ensuring IP67 protection
TUV/UL certified
Module Type USP P6-300/72 USP P6-295/72 USP P6-290/72 USP P6-285/72 USP P6-280/72
Rated Power at STC (Pmp) 300W 295W 290W 285W 280W
Power Tolerance ±3% ±3% ±3% ±3% ±3%
Power Maximum at STC 303W 298W 293W 288W 283W
Cell Efficiency (?c) 17.7-17.9% 17.4-17.7% 17.1-17.4% 16.8-17.1% 16.5-16.8%
Minimum Module Efficiency (?m) 15.5-15.7% 15.2-15.5% 14.9-15.2% 14.7-14.9% 14.5-14.7%
Open Circuit Voltage (Voc) 35.9V 35.9V 35.8V 35.7V 35.6V
Short Circuit Current (Isc) 8.35A 8.22A 8.10A 7.99A 7.98A
Maximum Power Voltage (Vmp) 45.1V 44.8V 44.8V 44.76V 44.21V
Maximum Power Current (Imp) 8.98A 8.8A 8.71A 8.6A 8.58A
Maximum System Voltage 1000V (TUV) 1000V (TUV) 1000V (TUV) 1000V (TUV) 1000V (TUV),600V (UL)
Maximum Series Fuse Rating 15A 15A 15A 15A 15A
External Dimensions 1950mm × 990mm × 50mm
Weight 24kg
Solar Cells Polycrystalline 156mm × 156mm (72pcs)
Front glass 3.2 mm tempered glass, low iron
Frame Anodized/ Electrophoretic aluminum aloy
Junction Box IP65 /IP67
Output Cables 4.0 mm2, symmetrical lengths 900mm
Connector SOLCABLE – CN40CM
Maximum Snow Load 550kg/m2
Maximum Wind Load 200km/h
Hailstone Impact Test 80km/h for 25mm ice ball
Pmax Temperature Coefficient -0.47%/°C
Voc Temperature Coefficient -0.32%/°C
Isc Temperature Coefficient +0.04%/°C
Operating Temperature -40~+85°C
Nominal Operating Cell Temperature (NOCT) 45±2°C